Leather hoops earring kit Instructions

Posted by Johnnie on 7/27/2013 to Kit Instructions

Kit Includes:

  • 4 Terminals
  • 2 5mm S/S Closed Rings
  • 2 6mm S/S Jump Rings
  • 11" of each color of 2.5mm leather
  • 1 pair of S/S Ear Wires

Additional Supplies:

  • Sharp Scissors
  • Super New Glue
  • Ruler
  • Bent Nose Pliers

Step 1 Cut your black leather in half, and then in half once more leaving you with 4 even pieces of leather. Now repeat for your metallic dark silver leather.

Step 2 Take 1 terminal, holding your 4 pieces of leather in the color arrangement that you would like apply 2-3 drops of glue and then insert your 4 pieces of leather into it. Repeat for the other earring. LET REST 10 MINUTES

Step 3 Now you will want to make sure the leather glued into your terminal is all cut to an even suggested length of 2.5". Repeat for the other earring.

Step 4 Just like in Step 2 you will take your 4 pieces of leather already glued into a terminal and glue the other ends into the other terminal. LET REST 10 MINUTES

Step 5 Now you will open your 2 jump rings.

Step 6 Taking your 6mm jump ring, run it through both of your terminals forming a loop and then through your 4mm closed ring then close your 6mm jump ring. Repeat for other earring.

Step 7 Take your ear wire and open the loop at the bottom, loop it through the 4mm closed ring then close it. Repeat for other earring.

Repeat for your second earring and enjoy!

comments powered by Disqus