Posted by Johnnie on 9/27/2012 to
Bead School

Instructions These instructions are for a 7.25" rock candy bracelet. To make adjustments, simply add another set of beads.
- String a crimp tube onto your wire, followed by a 4mm bicone and one end of your clasp. Back your wire back through your bicone and crimp tube. Crimp!.
- String a 4mm bicone and an 8mm top drill bicone onto your wire.
- String a 6mm squaredell onto your wire.
- String 2 8mm top drill bicone onto your wire.
- String a 6mm squaredell onto your wire.
- Continue alternating steps 4 and 5 until you have strung 14 6mm squaredells and 28 8mm top drill bicones. Remember that you started with 1 8mm top drill and you will end with 1 8mm top drill.
- String a 4mm bicone bead onto your wire.
- String a crimp tube onto your wire, followed by a 4mm bicone and the other end of your clasp. Back your wire back through your bicone and crimp tube. Crimp!.
|
| Material List
- 24 - 8mm TopDrilled Bicones (6301)
- 24 - 6mm Squaredells
- 2 - 6mm Bicones (5328 / 5301)
- 4 - 4mm Bicones (5328 / 5301)
- 1 Toggle of your choice
- 1 ft of Beadalon .015 49 strand Wire
- 2 - Crimp Tubes
Tools Needed
- Crimper Tool
- Nipper Tool
|